• Announcements

    • Zapata

      Abbreviated rules   07/28/2017

      Underdawg did an excellent job of explaining the rules.  Here's the simplified version: Don't insinuate Pedo.  Warning and or timeout for a first offense.  PermaFlick for any subsequent offenses Don't out members.  See above for penalties.  Caveat:  if you have ever used your own real name or personal information here on the forums since, like, ever - it doesn't count and you are fair game. If you see spam posts, report it to the mods.  We do not hang out in every thread 24/7 If you see any of the above, report it to the mods by hitting the Report button in the offending post.   We do not take action for foul language, off-subject content, or abusive behavior unless it escalates to persistent stalking.  There may be times that we might warn someone or flick someone for something particularly egregious.  There is no standard, we will know it when we see it.  If you continually report things that do not fall into rules #1 or 2 above, you may very well get a timeout yourself for annoying the Mods with repeated whining.  Use your best judgement. Warnings, timeouts, suspensions and flicks are arbitrary and capricious.  Deal with it.  Welcome to anarchy.   If you are a newbie, there are unwritten rules to adhere to.  They will be explained to you soon enough.  

charlie don't surf

Members
  • Content count

    204
  • Joined

  • Last visited

About charlie don't surf

  • Rank
    Anarchist

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    Region 3 AW
  1. A few years ago, I replaced wet core on the foredeck of my SR Max, coming at it from underneath. To replace the bottom (top?) layer of glass, I used two layers (one fore and aft, and the other from center support to edge) of bidirectional glass with West System epoxy. Unfortunately, the core got wet again, and I tried going in the same way. The Dremel was a joke, and a 7.5 amp angle grinder put grooves in the epoxy, and beveled the edge of the disc quickly. Any ideas on what I can use to cut through the epoxy and glass? Need enough horsepower to get through it, but not too deep as to cut through to the deck.