Jump to content


GP26 in Russia


  • Please log in to reply
108 replies to this topic

#1 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 08 March 2011 - 04:44 PM

New GP26 in Russia.
Mold ready for foam installation.
Attached File  mold.jpg   143.71K   99 downloads

#2 Presuming Ed

Presuming Ed

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 8,034 posts
  • Location:London, UK

Posted 08 March 2011 - 05:21 PM

Out of interest, who's the designer? Tx

#3 Ryley

Ryley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,045 posts
  • Location:Boston, MA
  • Interests:Sailing, Photography, Sailing, Mountain Biking.. did I mention sailing?

Posted 08 March 2011 - 08:13 PM

+1 - whose design, where is it being built, what are your plans, etc. etc.

Inquiring minds want to know!

#4 DAK

DAK

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 860 posts
  • Location:Sarnia

Posted 08 March 2011 - 08:17 PM

out of interest, have you posted pix of wife,gf etc.?

#5 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 09 March 2011 - 01:37 PM

+1 - whose design, where is it being built, what are your plans, etc. etc.

Inquiring minds want to know!


Design - www.tihonovdesign.ru
Production in Nizhniy Novgorod.

Attached File  GP26_RUS.pdf   87.64K   291 downloads

#6 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 09 March 2011 - 01:45 PM

Foam - Airex C70.75 15mm

Attached File  Bending foam.jpg   127.69K   165 downloads

#7 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 09 March 2011 - 08:38 PM

cool!! good luck

#8 Presuming Ed

Presuming Ed

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 8,034 posts
  • Location:London, UK

Posted 09 March 2011 - 09:31 PM

Production in Nizhniy Novgorod.


Wow. The most land-locked boat builder in the world? Good work! To be sailed on the Volga?

#9 Manfred

Manfred

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 369 posts
  • Location:North Germany
  • Interests:Sailing DN on hard water and all sorts of boats on soft water

Posted 10 March 2011 - 02:03 PM

Foam - Airex C70.75 15mm

Attached File  Bending foam.jpg   127.69K   165 downloads



Looks great!
Keep up the good work and try to come to Kieler Woche 2012.

#10 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 11 March 2011 - 03:02 PM

Looks great. Just a couple of points: Only 1 set of spreaders is allowed under GP26 class rules, and also the sheer 'must be a fair, concave curve in profile view'...you might want to get a measurement clarification on the last one (i.e. is 'concave' up or down) before you go much further, as your sheer looks convex to me? Keep us updated though with your progress!

#11 Kevin Farrar

Kevin Farrar

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 256 posts
  • Location:New London, Connecticut USA

Posted 11 March 2011 - 03:20 PM

The shear line looks pretty straight so it is most likely OK under the rules. As for the class rules some changes have been made in the last month which would allow double spreaders on aluminum spars and carbon to used in the keel fin with some weight adjustment plus other changes. Please go to the ORC.org site to download the GP26 current rule set.

On the build it great to see another boat getting started.
Kevin

#12 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 12 March 2011 - 09:09 AM

Installation of the foam is almost complete.

Attached File  foam2.jpg   105.46K   87 downloads Attached File  foam3.jpg   100.79K   84 downloads

#13 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 12 March 2011 - 01:23 PM

The shear line looks pretty straight so it is most likely OK under the rules. As for the class rules some changes have been made in the last month which would allow double spreaders on aluminum spars and carbon to used in the keel fin with some weight adjustment plus other changes. Please go to the ORC.org site to download the GP26 current rule set.

On the build it great to see another boat getting started.
Kevin


Ah that makes more sense...was looking at the old rules on the GP26 class site. Boat is looking good!

#14 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 15 March 2011 - 08:57 AM

Ready for laminating inner skin

Attached File  foam4.jpg   98.64K   66 downloads Attached File  foam5.jpg   106.08K   62 downloads


#15 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 21 March 2011 - 07:15 PM

Inner skin complete.
Laminating recess and area of the keel attachment

Attached File  innerskin.jpg   71.68K   109 downloads

#16 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 26 March 2011 - 07:01 PM

Bulkheads and keel structure.
Remains to install mast frame.

Attached File  bulkheads_aft.jpg   119.02K   103 downloads Attached File  keel_structure.jpg   116.75K   126 downloads Attached File  bulkheads_fore.jpg   112.68K   104 downloads

#17 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 27 March 2011 - 09:51 AM

Excellent progress. Are you working on her full time?

#18 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 27 March 2011 - 04:26 PM

Excellent progress. Are you working on her full time?



Yes. Until to launching less than two months.
In June starts Cup of Russia among sportboats.
http://www.open800.ru/

It is my second generation of GP26.
First here
http://3ve3da.ru/gp26.htm
http://3ve3da.ru/g_07.htm

Attached File  6.jpg   184.05K   157 downloads


Sorry for my english

#19 Ryley

Ryley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,045 posts
  • Location:Boston, MA
  • Interests:Sailing, Photography, Sailing, Mountain Biking.. did I mention sailing?

Posted 28 March 2011 - 11:50 AM

Zvezda - the Star. I like that. pretty boat. best of luck - 2 months is pretty aggressive :)

#20 Ryley

Ryley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,045 posts
  • Location:Boston, MA
  • Interests:Sailing, Photography, Sailing, Mountain Biking.. did I mention sailing?

Posted 28 March 2011 - 11:54 AM

Posted Image

Ouch.

#21 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 31 March 2011 - 09:08 AM

Posted Image

Ouch.


Full main, masthead assy 58 sqm, wind - 15m/s. Mast broke above the boom.

#22 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 31 March 2011 - 09:09 AM

Mast frame

Attached File  mast_frame.jpg   110.82K   89 downloads

#23 Savage 17

Savage 17

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,003 posts

Posted 04 April 2011 - 05:00 PM

Why did the mast break?

#24 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 14 April 2011 - 05:26 PM

Why did the mast break?


Too many sails :)

#25 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 14 April 2011 - 05:29 PM

Deck is ready


Plug
Attached File  deck_plug.jpg   43.24K   81 downloads

Mold
Attached File  deck-mold.jpg   153.78K   97 downloads

Deck
Attached File  deck1.jpg   117.26K   81 downloads

#26 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 14 April 2011 - 05:31 PM

Under deck

Attached File  under_deck.jpg   117.63K   56 downloads

#27 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 14 April 2011 - 05:51 PM

My previous boat went to the Caspian sea :)

Attached File  desert.jpg   386.69K   197 downloads Attached File  camel.jpg   393.58K   178 downloads



#28 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 14 April 2011 - 08:21 PM

Ochink Harasho (excuse my russian!)! You are making very fast progress. Can you tell us more about the boat, rig type, deck gear, was it VPP tested? Be good to see some videos of it and your last boat sailing sometime! :rolleyes:

#29 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 15 April 2011 - 01:07 PM

talk about the road rash that boat must've had on it by the time she arrived!

#30 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 15 April 2011 - 01:23 PM

talk about the road rash that boat must've had on it by the time she arrived!



yesteday reached to the sea



#31 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 17 April 2011 - 04:10 PM

Ochink Harasho (excuse my russian!)! You are making very fast progress. Can you tell us more about the boat, rig type, deck gear, was it VPP tested? Be good to see some videos of it and your last boat sailing sometime! :rolleyes:



Since 2003, we have been developing a class 8-meter trailer sportboat. www.open800.ru
It was the handicap class, but last year we decided to move on box rules - GP26.
This new project, in accordance with the GP26 rules.
This year will be built three boats.
Materials - SP Systems
Mast - carbon, "Selden masts"
Deck gear - Harken
Winches - Harken
Halyards - 1 x 20.2PTA
Primary - 2 x 20.2PTA
Rudder - all carbon




#32 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 18 April 2011 - 06:40 PM

Rudder stock is ready.

Attached File  rudderstock.jpg   176.37K   134 downloads

#33 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 19 April 2011 - 09:48 AM

Deck is bonded

Attached File  deck2.JPG   98.43K   100 downloads

#34 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 20 April 2011 - 01:00 PM

Demolding

Attached File  demold1.jpg   108.4K   77 downloads Attached File  demold2.jpg   104.53K   99 downloads
Attached File  demold3.jpg   105.5K   100 downloads Attached File  demold4.jpg   110.56K   76 downloads

#35 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 23 April 2011 - 12:53 PM

Flying along... :rolleyes:

#36 Kevin Farrar

Kevin Farrar

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 256 posts
  • Location:New London, Connecticut USA

Posted 23 April 2011 - 11:32 PM

Deck is bonded

Attached File  deck2.JPG   98.43K   100 downloads



Hi MTihonov,

Are you using tooling from your first GP26 or is this build entirely new?
What are you doing differently with your second boat?

The speed at which the boat is going together is impressive, I wish mine was moving along as fast.

Kevin Farrar

#37 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 24 April 2011 - 11:09 AM


Deck is bonded

Attached File  deck2.JPG   98.43K   100 downloads



Hi MTihonov,

Are you using tooling from your first GP26 or is this build entirely new?
What are you doing differently with your second boat?

The speed at which the boat is going together is impressive, I wish mine was moving along as fast.

Kevin Farrar



Thanks, Kevin!
Is a new project.
For new boat made some changes.
1. More powerful hullform to increase upwind and especially close reaching performance in strong wind.
2. Tuned transom height and form for expected heel angles and boat speed. To minimise wetted surface for light airs, and to maximise effective lenght when sailing at heel and speed.
3. To improve dynamic bow lift LCB a little moving aft, also moving keel and rig aft.

mid section and transom
Attached File  old_vs_new.JPG   14.84K   120 downloads


Michael

#38 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 29 April 2011 - 11:06 AM

Laminating outer skin


Attached File  outerskin1.jpg   102.84K   57 downloads

#39 Steam Flyer

Steam Flyer

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,016 posts
  • Location:Eastern NC

Posted 29 April 2011 - 11:33 PM

Thanks, Kevin!
Is a new project.
For new boat made some changes.
1. More powerful hullform to increase upwind and especially close reaching performance in strong wind.
2. Tuned transom height and form for expected heel angles and boat speed. To minimise wetted surface for light airs, and to maximise effective lenght when sailing at heel and speed.
3. To improve dynamic bow lift LCB a little moving aft, also moving keel and rig aft.

mid section and transom
Attached File  old_vs_new.JPG   14.84K   120 downloads


Michael


Which is the old, which is the new?
I'm guessing the sections with the slight knuckle in the topsides are the new improved hull form?

FB- Doug

#40 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 01 May 2011 - 05:55 AM


Thanks, Kevin!
Is a new project.
For new boat made some changes.
1. More powerful hullform to increase upwind and especially close reaching performance in strong wind.
2. Tuned transom height and form for expected heel angles and boat speed. To minimise wetted surface for light airs, and to maximise effective lenght when sailing at heel and speed.
3. To improve dynamic bow lift LCB a little moving aft, also moving keel and rig aft.

mid section and transom
Attached File  old_vs_new.JPG   14.84K   120 downloads


Michael


Which is the old, which is the new?
I'm guessing the sections with the slight knuckle in the topsides are the new improved hull form?

FB- Doug


Yes, you are right.
Another boat of the same project on the cover of ORC Classes 2011

#41 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 03 May 2011 - 02:59 PM

After post cure

Attached File  1.jpg   136K   169 downloads

#42 Soley

Soley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,839 posts
  • Location:This side of the Atlantic
  • Interests:Take a guess. It ain't too hard.....

Posted 03 May 2011 - 04:44 PM

This project looks great. I can't believe how quickly you are working considering it is a custom project.

This last photo really shows the power of your hull form. Looking forward to seeing the boat finished.

#43 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 19 May 2011 - 07:13 PM

Fairing in progress...

Attached File  fairing.jpg   108.35K   38 downloads Attached File  fairing2.jpg   97.95K   35 downloads

#44 Ryley

Ryley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,045 posts
  • Location:Boston, MA
  • Interests:Sailing, Photography, Sailing, Mountain Biking.. did I mention sailing?

Posted 20 May 2011 - 02:24 PM

How are you doing regarding the weight of this build? any idea how close to class minimum you'll be?

#45 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 20 May 2011 - 08:20 PM

How are you doing regarding the weight of this build? any idea how close to class minimum you'll be?



We expect weight of the boat about 1000 kg (minimum class weight) with 500 kg keel.
Hull weight at this stage - 350 kg


#46 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 11 June 2011 - 08:01 PM

Painting

Attached File  painting1.jpg   108.5K   96 downloads Attached File  painting2.jpg   111.95K   92 downloads

#47 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 11 June 2011 - 08:02 PM

Carbon rudder

Attached File  rudder.jpg   112.39K   114 downloads

#48 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 12 June 2011 - 09:59 AM

Beautiful work.

#49 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 12 June 2011 - 01:40 PM

Soweet!!

#50 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 17 June 2011 - 08:19 AM

To the sea

Attached File  onroad.jpg   72.12K   170 downloads

#51 Johannos

Johannos

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 110 posts
  • Location:lemmer, NL
  • Interests:boats, speed, composites, boards

Posted 17 June 2011 - 08:12 PM

This project makes me wish I was a badly paid boatbuilder again, instead of a badly paid composite engineer in a car factory...
Looks great, fast build!

#52 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 17 June 2011 - 09:44 PM

Fark me that is hot...can't wait to see this wee beastie sailing

#53 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 22 June 2011 - 05:04 PM

How did the launch go? Pics would be great :wub:

#54 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 22 June 2011 - 06:44 PM

How did the launch go? Pics would be great :wub:


Today...

Attached File  launch1.jpg   108.99K   229 downloads Attached File  launch2.jpg   121.75K   321 downloads Attached File  launch3.jpg   134.29K   296 downloads

#55 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 22 June 2011 - 10:53 PM

looks great!!

#56 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 28 June 2011 - 04:57 PM

How's the sailing going? Boat looks great on the water!

#57 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 29 June 2011 - 07:15 PM

How's the sailing going? Boat looks great on the water!


I was on board. Therefore, while not enough pictures.
Some photos the same boat from rail.

Attached File  DSCN1384_cr.jpg   261.74K   305 downloads Attached File  5.jpg   181.42K   351 downloads Attached File  1.JPG   199.78K   265 downloads

#58 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 29 June 2011 - 07:46 PM

Is this the same design as your boat?

#59 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 29 June 2011 - 07:48 PM

Is this the same design as your boat?


Yes

#60 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 29 June 2011 - 08:01 PM

Fantastic! How many boats have been built to this latest design? Keep the pics coming, and this is the standard for video...



Be good to see your boats in video too! Great work.

#61 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 15 August 2011 - 05:03 PM

Some photos...

Attached File  11.jpg   80.83K   327 downloads Attached File  12.jpg   79.17K   420 downloads Attached File  13.jpg   116.46K   366 downloads


Video coming soon.

Building of the third boat in progress

#62 Savage 17

Savage 17

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,003 posts

Posted 16 August 2011 - 03:00 AM

Who is the 3rd boat for? Where are all these boat going once you are done with them? Have you thought about making them for other people?

#63 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 16 August 2011 - 03:34 PM

Who is the 3rd boat for? Where are all these boat going once you are done with them? Have you thought about making them for other people?


The third boat is for Russia too. Our sportboat class had switched to the GP26 box rules in 2010.As for my last project, the third boat will be used to make the mold and we already have two orders for the season 2012.

#64 Ryley

Ryley

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,045 posts
  • Location:Boston, MA
  • Interests:Sailing, Photography, Sailing, Mountain Biking.. did I mention sailing?

Posted 17 August 2011 - 01:46 PM

That picture of you going upwind - is that the designed heel angle? :unsure:

#65 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 17 August 2011 - 09:03 PM

That picture of you going upwind - is that the designed heel angle? :unsure:


Optimal heel angle for upwind about 15 degrees. On photo a little more :)

#66 barnone

barnone

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 662 posts

Posted 17 August 2011 - 09:41 PM

That's a very pretty boat. Congrats!

#67 williwaw

williwaw

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 538 posts
  • Location:Netherlands, Amsterdam area

Posted 21 August 2011 - 07:07 AM

Do you have some more info on boat, like specs etc.
Is there an orc certificate

#68 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 21 August 2011 - 08:47 PM

Do you have some more info on boat, like specs etc.
Is there an orc certificate


LOA - 7.9m
Beam - 2.52m
Displacement in GP26 Class Rules trim - 1010 kg
Keel weight - 500 kg

Materials - SP Systems
Mast - carbon, "Selden masts"
Deck gear - Harken
Winches - Harken
Halyards - 1 x 20.2PTA
Primary - 2 x 20.2PTA
Rudder - all carbon with Jefa bearings

ORC Sertificate with Code 0 Attached File  RU2271_Azimuth.pdf   119.1K   106 downloads

#69 Munster

Munster

    Newbie

  • Members
  • Pip
  • 12 posts

Posted 24 August 2011 - 07:37 AM

How about this...



The FBYD / Van Munster GP26 yesterday in a 40 odd mile race at Hamilton Island race weekd, sailing under IRC in 25 to 30 kts of breeze and "offshore"

#70 yachtie2k4

yachtie2k4

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,395 posts
  • Location:Central Coast, NSW, AUSl
  • Interests:http://s56.photobucket.com/albums/g190/yachtie2k4/

    Sailing Sailing Sailing Sailing Sailing Sailing Sailing RC boats, Virtual Skipper 5

Posted 24 August 2011 - 09:49 AM

yes that is one slick vid munster :P

#71 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 14 October 2011 - 03:35 PM

Downwind at 14 knots

Attached File  vostok_14knots.jpg   160.18K   160 downloads


3rd hull is almost ready for painting and manufacturing a mold.

#72 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 14 October 2011 - 06:49 PM

sweet!

#73 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 15 November 2011 - 08:53 PM

Manufacturing the hull mold

Attached File  mold1.jpg   108.18K   51 downloads

#74 Savage 17

Savage 17

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,003 posts

Posted 21 November 2011 - 04:18 PM

New design? or to speed up build process....

#75 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 21 November 2011 - 04:44 PM

New design? or to speed up build process....


No, design the same. We manufacturing the mold from 3rd hull.
We try to develop this boats in Russia as one-design. Already 2 orders for 2012.

#76 Danish21

Danish21

    Newbie

  • Members
  • Pip
  • 5 posts
  • Interests:Sportboats

Posted 25 November 2011 - 05:42 PM

поздравления. Я надеюсь увидеть более.

#77 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 24 December 2011 - 02:15 PM

Mold is ready

Attached File  mold1.jpg   114.62K   63 downloads Attached File  mold3.jpg   102.36K   76 downloads Attached File  mold2.jpg   109.91K   51 downloads

#78 skint-again

skint-again

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 726 posts
  • Location:Dubai
  • Interests:er.......Sailing

Posted 03 January 2012 - 05:14 AM

where is the Caspian boat located?

#79 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 04 January 2012 - 07:14 AM

where is the Caspian boat located?


In Aktau, Kazakhstan

Attached File  174964_115769825197784_100002943006921_102514_1174800679_o.jpg   310.04K   66 downloads Attached File  174964_115769798531120_100002943006921_102511_1110926015_o.jpg   206.21K   73 downloads

#80 skint-again

skint-again

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 726 posts
  • Location:Dubai
  • Interests:er.......Sailing

Posted 05 January 2012 - 04:02 AM


where is the Caspian boat located?


In Aktau, Kazakhstan




I will be there on Monday and Tuesday next week and travel there a few times a year, maybe ask the owner to pm me some contact details so we can catch up.

Cheers

#81 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 05 January 2012 - 08:02 PM



where is the Caspian boat located?


In Aktau, Kazakhstan




I will be there on Monday and Tuesday next week and travel there a few times a year, maybe ask the owner to pm me some contact details so we can catch up.

Cheers


send PM

#82 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 10 January 2012 - 11:03 AM

Hull #4 is ready to start.

Attached File  mold1.jpg   91.04K   48 downloads Attached File  mold2.jpg   91.26K   44 downloads

#83 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 10 January 2012 - 02:11 PM

congrats!

#84 andrepeixoto

andrepeixoto

    Newbie

  • Members
  • Pip
  • 16 posts

Posted 23 January 2012 - 10:19 PM

How many people took to get Azimuth done from the construction of the mold structure to the finish hull?

#85 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 24 January 2012 - 12:46 PM

How many people took to get Azimuth done from the construction of the mold structure to the finish hull?


Three people.

#86 Kevin Farrar

Kevin Farrar

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 256 posts
  • Location:New London, Connecticut USA

Posted 26 February 2012 - 05:47 PM

How is hull number four coming along?
Kevin

#87 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 27 February 2012 - 11:25 AM

How is hull number four coming along?
Kevin


Deck is ready. Hull is prepared for laminating of inner skin.

Attached File  dscn0735_2.jpg   39.78K   124 downloads Attached File  dscn0738.jpg   265.33K   108 downloads

#88 windseekeryachts

windseekeryachts

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 225 posts
  • Location:Turkey

Posted 27 February 2012 - 12:54 PM

we will organize sportboat races in Istanbul this summer.
The fleet consists of 1 GP26, 2 farr 25, a handful of Beneteau 25s, a melges 24, 2 beneteau 7,5s
Any interest from Russian GPs?

Cheers,

#89 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 02 April 2012 - 05:10 PM

How is hull number four coming along?
Kevin


Hull #4 is ready!

Attached File  hull4_1.jpg   52.92K   49 downloads Attached File  hull4_2.jpg   71.27K   54 downloads

#90 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 02 April 2012 - 05:29 PM

Hull on the trailer delivered to the customer.

On the way back ...
Attached File  4.jpg   117.17K   25 downloads Attached File  3.jpg   120.54K   27 downloads

2 April. Spring in Russia ))

#91 Speedwatch

Speedwatch

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 515 posts
  • Location:Berlin - Germany

Posted 02 April 2012 - 06:00 PM

we will organize sportboat races in Istanbul this summer.
The fleet consists of 1 GP26, 2 farr 25, a handful of Beneteau 25s, a melges 24, 2 beneteau 7,5s
Any interest from Russian GPs?

Cheers,


1+

#92 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 02 April 2012 - 06:54 PM


we will organize sportboat races in Istanbul this summer.
The fleet consists of 1 GP26, 2 farr 25, a handful of Beneteau 25s, a melges 24, 2 beneteau 7,5s
Any interest from Russian GPs?

Cheers,


1+


Too far. 3000 km.
But if ORC would organize some regatta for GP26

#93 Nrg85

Nrg85

    Member

  • Members
  • PipPipPipPipPip
  • 48 posts
  • Location:Cro
  • Interests:Sailing

Posted 10 October 2012 - 02:36 PM

Is that roller furler under the deck or on the deck? Is roller allowed by the rules?

On that picture where you broke your mast I don't see the part of the mast that is going throught the cabin.
Do you have that different from the windseeker?

#94 MTihonov

MTihonov

    Member

  • Members
  • PipPipPipPipPip
  • 54 posts

Posted 11 October 2012 - 07:10 PM

Is that roller furler under the deck or on the deck? Is roller allowed by the rules?

On that picture where you broke your mast I don't see the part of the mast that is going throught the cabin.
Do you have that different from the windseeker?


1. Why not?
2. You don't see that part because it is not present. It was the deck stepped mast.
3. Yes

We almost complete hull #7.
On photo - hull #4
Posted Image
Posted Image

#95 StayinStrewn

StayinStrewn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,544 posts
  • Location:Stratford, CT
  • Interests:Sailing, snowboarding, hockey

Posted 11 October 2012 - 07:18 PM

awesome photo!!

#96 Savage 17

Savage 17

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,003 posts

Posted 11 October 2012 - 11:18 PM

Nice!!! When is someone going to export one of these to the US?

#97 Nrg85

Nrg85

    Member

  • Members
  • PipPipPipPipPip
  • 48 posts
  • Location:Cro
  • Interests:Sailing

Posted 12 October 2012 - 07:09 PM

I think it is very useful to have roller under the deck, especially on sports boat where you don't want to spent too much time on the foredeck.
Does all your boats have deck steped mast?
Is aluminium pole under the deck (from top of the cabin to the keel step) enough support?

Congratulations on 6 hulls!

#98 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 15 October 2012 - 05:07 PM

Hull number 7?!!! Great news! Any videos yet of your boats sailing?

#99 fdsailor

fdsailor

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 587 posts
  • Location:The bonnie Clyde

Posted 22 December 2012 - 12:30 PM

Ok MtiHonov, how much for one of these? And how many built now? Be nice to see more pics and video! Well Done indeed.

#100 Savage 17

Savage 17

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,003 posts

Posted 22 December 2012 - 09:59 PM

Ok MtiHonov, how much for one of these? And how many built now? Be nice to see more pics and video! Well Done indeed.


How much shipped to the East Coast?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users