My new Nexus NX2 are working togther with a Jefa Unit 1. It works well in power styring mode, and it works well in the pilot calibration R7. The instrument can show nav, awa, nav and hdc from the server, but when I turne it on it is just locked in the rudderposition. The server is quite old, so mayby it can talk to the instrument but not the servo 1510. Can anybody help me?
0
Nexus AP with network server
Started by Pretty Flamingo, Sep 16 2012 04:26 PM
2 replies to this topic
#1
Pretty Flamingo
-
- Members
-
- 2 posts
Newbie
- Location:Denmark
- Interests:Nexus AP conection to Jefa Unit 1
Posted 16 September 2012 - 04:26 PM
#2
Woolfy
-
- Members
-
- 352 posts
Anarchist
- Location:Waiheke Island
Posted 17 September 2012 - 09:17 PM
You shouldn't be having this problem all the old serers can talk to the 1510, so I don't see why this is happening. As you're based in Denmark with the time zone differences between you there and me in New Zealand it would probably be a good idea if you contacted our office in Sweden +46 (0) 8 506 939 15 I'm sure they will be able to help.
#3
Pretty Flamingo
-
- Members
-
- 2 posts
Newbie
- Location:Denmark
- Interests:Nexus AP conection to Jefa Unit 1
Posted 26 October 2012 - 04:26 PM
Solution: The build in rudder feedback in the Jefa Unit have to be connected with an 10 m ohm resistance on both end-wires, I Think it is ón the Brown and red. That will transformatorer the angel from 62 degree to 31 degree.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
