Jump to content


2012/13 Winter Projects- Whatcha got?

electrical fiberglass epoxy west systems G flex G10 mast haul out sea cock plumbing

  • Please log in to reply
89 replies to this topic

#1 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 07 November 2012 - 06:57 PM

I'll start:

Replace standing rigging
Fiberglass repairs to cockpit locker lid
Anchor light repair/replacement
Two-door companionway entry
Brightwork rejuvenation
Winch greasing

Whatcha got?

#2 SailAR

SailAR

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 778 posts

Posted 07 November 2012 - 07:01 PM

Beyond normal maintenance? New electronics. New head. Maybe some additional fresh water capacity.

#3 Soņadora

Soņadora

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 5,787 posts
  • Location:The Corn Coast, MN

Posted 07 November 2012 - 07:05 PM

none

HAAHAHAHHAHHAHHA

AHAH
HAHAHA!

#4 Gatekeeper

Gatekeeper

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 4,747 posts
  • Location:Lake Nipissing, Ontario
  • Interests:Learning to adjust to retirement...so far, so good.

Posted 07 November 2012 - 07:09 PM

- finish installing new ports
- install an ice water dispenser
- improve shower set up in head
- build new doors for interior lockers

#5 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 07 November 2012 - 08:16 PM

none

HAAHAHAHHAHHAHHA

AHAH
HAHAHA!


That's great Rick, really.





Now get your ass on a plane and come help me with some of this wood work. ;)

#6 hard aground

hard aground

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 7,337 posts
  • Location:out with my droogs

Posted 07 November 2012 - 08:18 PM

stuffing box - either repack or go dripless, haven't decided yet
possibly moving battery location
other normal maintainance

#7 Steam Flyer

Steam Flyer

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,118 posts
  • Location:Eastern NC

Posted 07 November 2012 - 08:20 PM

New Boat

FB-Doug

#8 briartrtpd..

briartrtpd..

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,343 posts
  • Location:sydney aust
  • Interests:sailing sometimes

Posted 07 November 2012 - 08:29 PM

Go sailing!

#9 Tucky

Tucky

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,691 posts
  • Location:Maine

Posted 07 November 2012 - 09:07 PM

I need to refinish my carbon sprit, as 12 years of sun has done its job. I'm going to paint it white and also install my navigation lights at the tip- as that is the only location on my boat that will meet the regs when my spinnaker or screecher are up. While I'm at it I'll paint my other carbon bits (tiller, radar mount and pigstick ) which are much fresher but will someday need the work so might as well be now.

I'm sure I'll be seeking advice- the sprit especially needs quite a bit of prep.

#10 Soņadora

Soņadora

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 5,787 posts
  • Location:The Corn Coast, MN

Posted 07 November 2012 - 09:20 PM


none

HAAHAHAHHAHHAHHA

AHAH
HAHAHA!


That's great Rick, really.





Now get your ass on a plane and come help me with some of this wood work. ;)


ha! what sort of 'brightwork' do you have? A freakin' handle on your sliding hatch? :P

I actually do have stuff. We brought all the cushions home to reupholster. Then the girls decided they wanted to be on the H.S. x-country ski team. $2000 worth of x-country ski shit later and the chances of us ever reupholstering are pretty much shot. I do have enough material to finish my dodger, so I'll have to find time to squeeze that in somehow.

And don't even think about lecturing me for buying stuff for the kids. SWMBO is a Finnish native. That x-country crap is in their DNA.

#11 kdh

kdh

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,566 posts
  • Location:narragansett bay

Posted 07 November 2012 - 09:29 PM

1. Have my port alternator sent out for replacement/repair.

2. Wait for next season.

Posted Image

#12 Mung Breath

Mung Breath

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location:Connecticut
  • Interests:Balance in Life

Posted 07 November 2012 - 09:38 PM

  • shorten, lighten and add support to radar mast
  • upgrade head and downwind sail handling rigging
  • add socks to asymm's
  • add storm sail track and storm sails
  • add lee cloths
  • add life raft
  • add cockpit table
  • add doghouse dodger for pure racing days
  • correct stove gimbal
  • restrike waterline
  • rebed s/s hardware
  • install ST secondary winches and upgrade primaries
  • awlgrip cosmetic maintenance
  • replace standard bilge-located pump strainer with conventional water intake strainer higher up
  • finally connect the AIS-B
  • wet sand a few more coats of SeaFin into the sole
  • varnish maintenance
Should keep me and the Industry busy this winter....

#13 Mung Breath

Mung Breath

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 768 posts
  • Location:Connecticut
  • Interests:Balance in Life

Posted 07 November 2012 - 09:44 PM

1. Have my port alternator sent out for replacement/repair.

2. Wait for next season.

Posted Image


3. Prepare for SAYC Narragansett Bay Rendezvous - Part Deux
4. Remove 5-gallon pales from keel
6. Gag and hog tie WHL and Booms
7. Book the Skiing Van Trapp Sisters for the Bearded Clam Clambake

#14 blackjenner

blackjenner

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,627 posts
  • Location:Seattle
  • Interests:MrsBlack, Brigadoon, freedom

Posted 07 November 2012 - 10:04 PM

none

HAAHAHAHHAHHAHHA

AHAH
HAHAHA!


He's gone mad...

#15 blackjenner

blackjenner

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,627 posts
  • Location:Seattle
  • Interests:MrsBlack, Brigadoon, freedom

Posted 07 November 2012 - 10:06 PM

Clean up various electrical stuff inside the cabin.
Some engine room organizing and cleanup.
Stop any new leaks where and when I can (a few have popped up).
Resew, by hand, the used sail cover we bought.

Mostly low level maintenance as we did a lot of big things this summer.

#16 bljones

bljones

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,172 posts
  • Location:CA
  • Interests:Sailing

Posted 07 November 2012 - 10:13 PM

Start the next boat. maybe fab up a hard dodger for Whiskeyjack, and a cockpit enclosure.

#17 sculpin

sculpin

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,022 posts
  • Location:44 deg 38' 54.65N 63 deg 35' 41.17W
  • Interests:Sailing, Beer, and power tools.

Posted 07 November 2012 - 11:01 PM

Some gelcoat work, probably some kiwigrip - my "non-skid" is practically non existent in a few places.
Clean up a bit more wiring.
I may drop and re-build the rudder, but I'm thinking of putting that off for another year.
My list usually expands as fall drags out though!

#18 kdh

kdh

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,566 posts
  • Location:narragansett bay

Posted 07 November 2012 - 11:18 PM


1. Have my port alternator sent out for replacement/repair.

2. Wait for next season.

Posted Image


3. Prepare for SAYC Narragansett Bay Rendezvous - Part Deux
4. Remove 5-gallon pales from keel
6. Gag and hog tie WHL and Booms
7. Book the Skiing Van Trapp Sisters for the Bearded Clam Clambake


Very funny. Looking forward to 3 - 7. I hope the van Trapps can make it.

#19 rattus32

rattus32

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 400 posts
  • Location:Vail, CO

Posted 08 November 2012 - 12:33 AM



none

HAAHAHAHHAHHAHHA

AHAH
HAHAHA!


That's great Rick, really.





Now get your ass on a plane and come help me with some of this wood work. ;)


ha! what sort of 'brightwork' do you have? A freakin' handle on your sliding hatch? :P

I actually do have stuff. We brought all the cushions home to reupholster. Then the girls decided they wanted to be on the H.S. x-country ski team. $2000 worth of x-country ski shit later and the chances of us ever reupholstering are pretty much shot. I do have enough material to finish my dodger, so I'll have to find time to squeeze that in somehow.

And don't even think about lecturing me for buying stuff for the kids. SWMBO is a Finnish native. That x-country crap is in their DNA.


It could be worse - mine do telemark team. Shit makes alpine equipment look cheap.

#20 sculpin

sculpin

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,022 posts
  • Location:44 deg 38' 54.65N 63 deg 35' 41.17W
  • Interests:Sailing, Beer, and power tools.

Posted 08 November 2012 - 01:28 AM

So tell me again, what is the fastest recorded thread drift in Cruising Anarchy??? :rolleyes:

#21 Brodie

Brodie

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 297 posts

Posted 08 November 2012 - 01:36 AM

New lifelines and stanchions. Rebed stanchion bases
Install autopilot
Remove sea hood, pray there isn't too much wet core, dry out, repair as necessary, reinstall and rebed
figure out how to shift ballast aft so boat floats level so water doesn't collect in sea hood
varnish all locker fronts/cabin table/doors etc (all in my basement this winter)

#22 Elegua

Elegua

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 567 posts
  • Location:The country that dare not speak its name

Posted 08 November 2012 - 02:16 AM

1) Rip up and replace aluminum toe-rails. Unfortunately these are on 4' centers and the joint is glassed in :(
2) Adding a proper mid-sips cleat into above toe-rail solution
2) Re-furb hatches and re-bed some key fixtures
3) New dodger

Still on the list for future years:
1) New teak decks & re-bed deck gear (ouch!)
2) Re-wire
3) Re-do limber holes & re-paint bilg
4) Clean-up hillbilly roll-bar/arch
5) Bottomjob (ouch!)
6) Replace standing rigging
7) Some decisions to make about sail plan & rigging.
8) Maybe some interior mods
9) Electronic Upgrade (last)
10) Actually leave

#23 SpongeDeckSquareFoil

SpongeDeckSquareFoil

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 443 posts

Posted 08 November 2012 - 03:01 AM

Visit the wrong side of the tracks and find a voodoo map so I can cast some major snow juju on the northern Great Lakes basin so I don't end up with a Gate-like summer.

Also put the outboard on crash diet. Fucker is getting heavy all of a sudden.

#24 Gatekeeper

Gatekeeper

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 4,747 posts
  • Location:Lake Nipissing, Ontario
  • Interests:Learning to adjust to retirement...so far, so good.

Posted 08 November 2012 - 03:12 AM

Visit the wrong side of the tracks and find a voodoo map so I can cast some major snow juju on the northern Great Lakes basin so I don't end up with a Gate-like summer.


Ohhhh don't remind me...

#25 Cruisin Loser

Cruisin Loser

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 3,656 posts
  • Location:West Texas, Taos, Maine
  • Interests:Sailing, rock climbing, skiing, steatopygia, stuff

Posted 08 November 2012 - 03:37 AM

The yard will be tweaking the boat, we're planning to go to Bermuda again.

I'll be working like a banshee with a bottle rocket up his ass trying to get a bunch of work done so I can have next summer off, plus the high school robotics team I mentor is in full design and build mode. We went to Worlds last year and want to get back there.

I need to see my home in Taos and do some skiing and fly fishing, plus find time to be the best possible husband and father I can be.

If there's time, there is a 5.12d climb with which I have some unfinished business.

Whew!

#26 Balder

Balder

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 534 posts
  • Location:Hong Kong (from Bellingham, WA)
  • Interests:Sailing, and currently trying to configure my career to sail more, may be able to pull it off.

Posted 08 November 2012 - 03:47 AM

Build my V-40 half hull to hang on the wall as motivation to keep working my ass off so I can get the real thing!

Thanks again, Bob!

#27 deadbeatracer

deadbeatracer

    Member

  • Members
  • PipPipPipPipPip
  • 62 posts
  • Location:dignity village,OR

Posted 08 November 2012 - 05:07 AM

Finish last years winter project of fixing up a few spots on the deck which turned into
Removing everything from the hull up
Refinishing the entire top sides
Rerigging the boat
Fixing up the mast
Building new stern pulpits
Rewiring
Painting the interior
Replacing the floorboards
Designing and building a new galley
Which turned into a all summer and fall project
Fuck, I want to sail it, getting closer
Carefull of what you start on!

#28 B.J. Porter

B.J. Porter

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 29,088 posts
  • Location:On my boat, somewhere...
  • Interests:Hallberg-Rassy 53 "Evenstar"

Posted 08 November 2012 - 12:24 PM

Winter?

#29 dacapo

dacapo

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,623 posts
  • Location:NY
  • Interests:walks on the beach,a good book,a good cry

Posted 08 November 2012 - 12:27 PM

new teak/holly cabin sole (I've put 3 new soles in OPB's over the past few months and said what the fuck, I'll just do one more as I'm in the zone right now)

#30 Innocent Bystander

Innocent Bystander

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,798 posts
  • Location:Lower Southern MD

Posted 08 November 2012 - 01:02 PM

FInish last year's "remove old bottom paint, address 3-4 small blisters and repaint" that turned into peeling 1/2' of hydrolyzed laminate from the keel to the WL and relaminating and refairing the hull. Almost ready to barriercoat and call that done just in time for the first snowfall.

Oh, I'll have a knee replacement done in mid December so I will be mobile when it's time to launch.

#31 PNW Matt B

PNW Matt B

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,507 posts
  • Location:Everett, WA

Posted 08 November 2012 - 01:56 PM

Let's see... finish trimming out the interior, seal the propane locker, chase the leak in the galley area, add lighting in the main cabin, touch up the paint on deck and maybe add a little kiwigrip - didn't get it thick enough in a few spots. Those are the big items...

#32 crash

crash

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,729 posts

Posted 08 November 2012 - 01:57 PM

Rebed stantions, handrails, and chainplates (boat leaked like a sieve during Sandy - 6 gals of rainwater were sponged out of the bilge over 3 days)
Repack stuffing box
Dig out fairing around keel smile and let dry all winter...refair in spring
Replace rotten floor supports forward
Dig out and recore/fill with epoxy the small wet spots in deck around cockpit
Remove, overhaul, rebed primary winches

#33 Tucky

Tucky

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,691 posts
  • Location:Maine

Posted 08 November 2012 - 03:02 PM

Winter?


That is inspiring, even for those of us that want to go the other way where summer is shorter.

Way to go.

#34 sailman

sailman

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 7,816 posts
  • Location:Portsmouth, RI

Posted 08 November 2012 - 03:10 PM

Installing refrigeration in the icebox, pics to follow.
Normal engine maintenance

Mung, count me in for another rendezvous.

#35 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 08 November 2012 - 03:40 PM

I've enjoyed reading this. You guys have inspired a few more ideas. Life lines, for one.

#36 Slick470

Slick470

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 963 posts
  • Location:Virginia

Posted 08 November 2012 - 03:47 PM

Bottom job
New zincs
Look at upgrading prop

There is a lot more on the extended list, but looking to do the basics this winter as time is a bit of an issue.

#37 Becalmed

Becalmed

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 464 posts

Posted 08 November 2012 - 03:55 PM

New diseasal and everything attached to it. So far it is in, plumbed to the new seacock, attached to the new exhaust, and wired. Just getting a few backordered parts so I can attach the new fuel tank this weekend. Just finishing up soundproofing as well, hoping to keep the clatter under control.

#38 Bob Perry

Bob Perry

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 17,254 posts

Posted 08 November 2012 - 03:58 PM

Gosh, with my boat sold I don't even have to make periodic trips to check it and make sure the boom tent is still in place.

So my short list is:
Survive Christmas
Spend time with Violet.
Refinish my dinghy oars.

Balder:
You are very welcome. Glad I could help you out.

#39 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 08 November 2012 - 03:59 PM

Damn, I'm envious of you people who know how to work with wood and varnish, and fiberglass.
I need lessons.

#40 sailman

sailman

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 7,816 posts
  • Location:Portsmouth, RI

Posted 08 November 2012 - 04:32 PM

I've enjoyed reading this. You guys have inspired a few more ideas. Life lines, for one.

Lifelines are on the list but that is just "place order" and install. I toyed with the idea of spectra but over time it would not look as nice and would not last as long as stainless.

#41 Gatekeeper

Gatekeeper

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 4,747 posts
  • Location:Lake Nipissing, Ontario
  • Interests:Learning to adjust to retirement...so far, so good.

Posted 08 November 2012 - 04:33 PM

Here's my idea for ice cold drinking water while cruising...I have refrigeration but seldom use it. I have to carry drinking water so we freeze four 10L water jugs solid, two go in the icebox, two get stored in a super cooler for use later in the week.

After 24 hours water starts to form in the bottom of the jugs. I'll fish a soft plastic hose in the jug, to the bottom. The hose will be attached to a pump that is permanently mounted on the counter top.

Any thoughts...??

Attached Files



#42 sailman

sailman

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 7,816 posts
  • Location:Portsmouth, RI

Posted 08 November 2012 - 05:19 PM

Here's my idea for ice cold drinking water while cruising...I have refrigeration but seldom use it. I have to carry drinking water so we freeze four 10L water jugs solid, two go in the icebox, two get stored in a super cooler for use later in the week.

After 24 hours water starts to form in the bottom of the jugs. I'll fish a soft plastic hose in the jug, to the bottom. The hose will be attached to a pump that is permanently mounted on the counter top.

Any thoughts...??

Along those same lines: Take a cooler and fit an inlet and outlet hose fitting. Place a coil of hose inside from one end to the other so that water going through the hose just passes through the cooler. Now fill the cooler with water and freeze it. Bring it down to the boat and hook it up to your water line for your pump and pump from your boat's water tank. The water will chill as it passes through the ice.

#43 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 08 November 2012 - 05:28 PM

Nice. Po' boy's heat exchanger.

#44 Merit 25

Merit 25

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,669 posts
  • Location:VA and MD USA

Posted 08 November 2012 - 05:47 PM

All new electrical - don't know what I'm doing
New bottom paint
Bilge pump - its about time
new lower stay
extra halyard
auto pilot
stereo
and a ton of other stuff that won't get done before the next race.

#45 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 08 November 2012 - 06:12 PM

All new electrical - don't know what I'm doing
New bottom paint
Bilge pump - its about time
new lower stay
extra halyard
auto pilot
stereo
and a ton of other stuff that won't get done before the next race.


A stereo's extra weight, ya know. I guess you could always leave the rhum and ginger beer behind. -_-

#46 Ishmael

Ishmael

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 9,325 posts
  • Location:Fuctifino

Posted 08 November 2012 - 06:31 PM

Damn, I'm envious of you people who know how to work with wood and varnish, and fiberglass.
I need lessons.


I'd be happy to give you some hands-on instruction. You can visit Bob while you're out here.

Edit: Oh, yeah, projects. Install new Vernalift muffler, run a new 2" exhaust line to the back of the boat and iinstall a new 2" thruhull; mount rudder angle indicator while I'm back there in the torture box.
I can't do this in the rain very well because I have to undo the cockpit drain hose to get back there and any water would run right down my back. The coincidence of a day off with no rain unfortunately triggers the pinched nerve in my back and I have to sail to work the kinks out. That's why I have had all the parts for 4 years and never did it.

#47 Merit 25

Merit 25

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,669 posts
  • Location:VA and MD USA

Posted 08 November 2012 - 06:41 PM

A stereo's extra weight, ya know. I guess you could always leave the rhum and ginger beer behind. -_-


Rum and ginger beer are never left behind. I'll sail short handed before that happens.
And the tunes I desperately need during deliveries.

#48 Gatekeeper

Gatekeeper

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 4,747 posts
  • Location:Lake Nipissing, Ontario
  • Interests:Learning to adjust to retirement...so far, so good.

Posted 08 November 2012 - 06:50 PM

Slightly OT...

As in the pic I posted of our icebox...I "married" the two loose covers together and hinged them. A strong magnet holds it open.

What is the idea behind the loose covers? Mine were best at sliding off the counter and landing on my bare foot. If that was the idea, it was amazingly successful!!

#49 rodauthor

rodauthor

    Member

  • Members
  • PipPipPipPipPip
  • 43 posts
  • Location:Sunset side of Michigan
  • Interests:Boat Slave

Posted 08 November 2012 - 06:52 PM

Because I bought the fixer upper ..I have now moved to the electronics list . . I am considering a Lowrance Mark 5 gold to replace the Loran that came with the boat . . .I have the north 3dl sails that I dumpster dove recut and the biggy for the summer is to varnish brightwork and get it up to a yearly cycle

#50 Slick470

Slick470

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 963 posts
  • Location:Virginia

Posted 08 November 2012 - 07:03 PM

Edit: Oh, yeah, projects. Install new Vernalift muffler, run a new 2" exhaust line to the back of the boat and iinstall a new 2" thruhull; mount rudder angle indicator while I'm back there in the torture box.
I can't do this in the rain very well because I have to undo the cockpit drain hose to get back there and any water would run right down my back. The coincidence of a day off with no rain unfortunately triggers the pinched nerve in my back and I have to sail to work the kinks out. That's why I have had all the parts for 4 years and never did it.


I've been back there on Mrgnstrn's boat... it is indeed a torture box, and I'm not a very big guy.

#51 Becalmed

Becalmed

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 464 posts

Posted 08 November 2012 - 07:47 PM

I just ran 2" hose as well, and my only word of advice is use the Vetus bendy exhaust hose. It is much easier to crawl around with and maneuver around onto the fittings.


Damn, I'm envious of you people who know how to work with wood and varnish, and fiberglass.
I need lessons.


I'd be happy to give you some hands-on instruction. You can visit Bob while you're out here.

Edit: Oh, yeah, projects. Install new Vernalift muffler, run a new 2" exhaust line to the back of the boat and iinstall a new 2" thruhull; mount rudder angle indicator while I'm back there in the torture box.
I can't do this in the rain very well because I have to undo the cockpit drain hose to get back there and any water would run right down my back. The coincidence of a day off with no rain unfortunately triggers the pinched nerve in my back and I have to sail to work the kinks out. That's why I have had all the parts for 4 years and never did it.



#52 Innocent Bystander

Innocent Bystander

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,798 posts
  • Location:Lower Southern MD

Posted 08 November 2012 - 08:11 PM


A stereo's extra weight, ya know. I guess you could always leave the rhum and ginger beer behind. -_-


Rum and ginger beer are never left behind. I'll sail short handed before that happens.
And the tunes I desperately need during deliveries.


Simple Stereo http://www.eskimo.co...ple_stereo.html doesn't weigh much.

#53 Ishmael

Ishmael

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 9,325 posts
  • Location:Fuctifino

Posted 08 November 2012 - 08:45 PM

Because I bought the fixer upper ..I have now moved to the electronics list . . I am considering a Lowrance Mark 5 gold to replace the Loran that came with the boat . . .I have the north 3dl sails that I dumpster dove recut and the biggy for the summer is to varnish brightwork and get it up to a yearly cycle


In my experience selling marine electronics for years, I would pick Lowrance only if there were no other options and it didn't matter if it worked or not.

#54 Tucky

Tucky

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,691 posts
  • Location:Maine

Posted 08 November 2012 - 09:04 PM

Having owned very limited electronics, I was a reluctant purchaser of a Lowrance plotter and broadband radar in 2009. I did it because Navico had purchased them and was offering broadband radar first through that brand. I've had no problems in the last four years with either bit. There have been regular firmware upgrades to both units and I've never had a problem.

#55 Heavy Metal

Heavy Metal

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 707 posts
  • Location:Sydney and Hong Kong.

Posted 09 November 2012 - 12:08 AM

Winter?! Whats this winter you speak of?

#56 stickboy

stickboy

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,200 posts
  • Location:Maine

Posted 09 November 2012 - 01:22 AM


Winter?


That is inspiring, even for those of us that want to go the other way where summer is shorter.

Way to go.


You're such a gentleman Tucky.

I was going to go with 'Bite me'.

#57 Jose Carumba

Jose Carumba

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,496 posts
  • Location:Pugetopolis

Posted 09 November 2012 - 03:07 AM

1. Get trailer blasted, primed, powder coated.
2. Replace old stainless wire on backstay adjuster with Amsteel.
3. Install new rocking mast step.
4 . New jib & main halyard setups.
5. New tighter fitting outboard well closure plate.

I'd like to paint the hull but that will need to wait for drier weather.

#58 Gatekeeper

Gatekeeper

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 4,747 posts
  • Location:Lake Nipissing, Ontario
  • Interests:Learning to adjust to retirement...so far, so good.

Posted 09 November 2012 - 12:59 PM

Find more attractive anchor....

Attached Files



#59 toddster

toddster

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 481 posts
  • Location:The Gorge

Posted 11 November 2012 - 06:08 PM

1. Make a new companionway hatch. Kind of hard to get the curves and fiddly bits right when the boat is a hundred miles from the shop, but the blue plastic tarp has got to go!

2. Build a real propane locker.

3. Install new roller reefing - finished :D (Although I seem to have strained my whole arm somewhere around the third trip up the mast. I don't remember any particular event - maybe just hanging on too tight :o )

Wow. I think this is the first weekend I haven't stopped by the boat for at least a couple of hours... all year! Gotta get over there and blow out all the newly installed plumbing, before serious cold comes along though.

Oh, also every single bit of hardware on deck needs to be wrestled free and re-bedded. I'll just take that one piece at a time though. No hurry.

Posted Image

#60 shanedennis

shanedennis

    Member

  • Members
  • PipPipPipPipPip
  • 47 posts
  • Location:On the boat somewhere
  • Interests:Itchy feet.

Posted 12 November 2012 - 01:09 AM

My winter project - pay off my bloody boat so there will be no more bloody winters.

#61 Catalina 36

Catalina 36

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 377 posts
  • Location:Leesburg, VA

Posted 12 November 2012 - 12:30 PM

Mainly routine stuff this winter:

Bed Chainplates and a couple of leaking stantion bases.
Touch up teak
Prep and paint bottom

Not so routine:
Replace water heater
Refinish Cabin Sole
Install sliding shelf in dry locker
Build bottle rack in liquor locker

Budget allowing:
Replace dodger

#62 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 12 November 2012 - 01:50 PM

1. Make a new companionway hatch. Kind of hard to get the curves and fiddly bits right when the boat is a hundred miles from the shop, but the blue plastic tarp has got to go!

2. Build a real propane locker.

3. Install new roller reefing - finished :D (Although I seem to have strained my whole arm somewhere around the third trip up the mast. I don't remember any particular event - maybe just hanging on too tight :o )

Wow. I think this is the first weekend I haven't stopped by the boat for at least a couple of hours... all year! Gotta get over there and blow out all the newly installed plumbing, before serious cold comes along though.

Oh, also every single bit of hardware on deck needs to be wrestled free and re-bedded. I'll just take that one piece at a time though. No hurry.

Posted Image


Hey Toddster, long time-no see. Glad to see that you're charging ahead and keeping the faith. ;)

#63 toddster

toddster

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 481 posts
  • Location:The Gorge

Posted 12 November 2012 - 06:34 PM

Thnx. Didn't have much time for web surfing while the boat was in the yard, sucking up time and money, and summer was ticking away. Guess I was more in the ericson and moyer forums for specific dumb questions.

#64 Anomaly2

Anomaly2

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 563 posts
  • Location:Rhode Island
  • Interests:sailing, building small boats...

Posted 14 November 2012 - 12:06 AM

I got a 1970 boat. Do I need to say more?

LOTS on my list..... Too much in fact--- think I'll start another thread with a dedicated question. You know how fussy everybody is around here about staying on topic......

#65 Ishmael

Ishmael

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 9,325 posts
  • Location:Fuctifino

Posted 14 November 2012 - 03:22 AM

Hey, look! A site devoted to boobs and food!

Posted Image

http://boobsandfood.tumblr.com/

#66 cuandonde

cuandonde

    Newbie

  • Members
  • Pip
  • 22 posts

Posted 14 November 2012 - 06:32 AM

Hi All.

I'd be happy to meet the protocol- if I knew how. Posting pics eludes me. Sorry.

This thread depressed me out of my lurker status. I'm just closing on a boat that was built the same year I was born. That would be in Ike's first term. Plus- the boat's been on the hard for 7 years. *sigh* But some day she'll be mighty pretty...

So the appropriate question for me is - "what ain't you got?".

What I don't have, thank God, is serious winter. Everything else? I got. First up? Bottom and hull paint. Then get the low-hour Yanmar running again,so I can splash, then move her 50-60 miles, to a dock closer to home. Then all new rigging...service winches/furler/other hardware...you get the picture. Oh! And recaulk the damn teak deck. My personal favorite.

Reading about some idiot that would take on a project like this makes most of you guys feel better about some varnish and hose replacement chores than even tits would, right? well..maybe not. but I DID try. :wacko:

#67 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 14 November 2012 - 01:59 PM

Re caulk the teak deck? Shudder...

#68 Beer Fueled Mayhem

Beer Fueled Mayhem

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 274 posts
  • Location:Ballard, WA

Posted 14 November 2012 - 07:26 PM

Re caulk the teak deck? Shudder...


That is a job that I am about half way through.

Attached File  2012-11-08_17-22-54_103.jpg   129.49K   4 downloads
This is a crappy photo but it is the new propane torpedo heater I brought to keep the chill off and get the deck dry for caulking.

Attached File  2012-11-01_12-20-24_234.jpg   101.25K   6 downloads

Attached File  2012-11-08_17-23-07_181.jpg   161.67K   3 downloads

Finished sanding the port side Monday. Cabin top is the last part. What a job. Knee pads. Have to have them.

Additional I have to:
  • Rebuild aft head
  • Seal mast collar
  • Rebuild primary and secondary winches
  • New bilge pump
  • figure out a way to know when the water-maker is done back flushing. My brine water goes to a through hull. Maybe a T to the salt water faucet in the galley
  • Fix leaking deck mounted radar pole
Lots more of course.

#69 mrgnstrn

mrgnstrn

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,371 posts
  • Location:Herring Bay, MD

Posted 14 November 2012 - 07:28 PM

lessee...winter project.....

1.sell boat.

2.wait until youngest is in college.

3.buy new boat...name it "N.A.V.Y."

4.go sailing again.


I kid. but don't think i haven't thought about it as it sits forlorn for months.

-m

#70 toddster

toddster

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 481 posts
  • Location:The Gorge

Posted 14 November 2012 - 07:31 PM

:unsure: Jeez, I don't even have torpedoes on my boat.
I didn't know they needed to be heated either... :blink:

#71 ronin

ronin

    Member

  • Members
  • PipPipPipPipPip
  • 70 posts
  • Location:Salish Sea
  • Interests:sailing

Posted 15 November 2012 - 06:12 AM

- finish installing GPS antenna (electrical portion)
- install radar reflector (backstay)
- resolve issue with solar panel wiring / 50% complete
- redo forward hatch seal
- reseal port portlight
- make headsail bag
- make handrail covers
- make dodger window covers
- make curtains
- remove and service all traveler parts (minus rail) / 90% complete
- service running rigging / 40% complete
- make anchor riding sail
- make BBQ cover
- service generator
- play Vendee Globe
- keep from pissing off the wife

cool thing? the list is shorter than last winter's!

#72 NonSequitur

NonSequitur

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 443 posts
  • Location:Alameda, CA

Posted 15 November 2012 - 10:56 AM


Re caulk the teak deck? Shudder...


That is a job that I am about half way through.

Attached File  2012-11-08_17-22-54_103.jpg   129.49K   4 downloads
This is a crappy photo but it is the new propane torpedo heater I brought to keep the chill off and get the deck dry for caulking.

Attached File  2012-11-01_12-20-24_234.jpg   101.25K   6 downloads

Attached File  2012-11-08_17-23-07_181.jpg   161.67K   3 downloads

Finished sanding the port side Monday. Cabin top is the last part. What a job. Knee pads. Have to have them.

Additional I have to:
  • Rebuild aft head
  • Seal mast collar
  • Rebuild primary and secondary winches
  • New bilge pump
  • figure out a way to know when the water-maker is done back flushing. My brine water goes to a through hull. Maybe a T to the salt water faucet in the galley
  • Fix leaking deck mounted radar pole
Lots more of course.



Quit padding your list! We rebuilt everything on your winch farm except the port side cabin top winches next to the companionway right before Swiftsure...

If you were really planning on rebuilding them all again, consider this one of the best favors I have ever done for you....

#73 Beer Fueled Mayhem

Beer Fueled Mayhem

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 274 posts
  • Location:Ballard, WA

Posted 15 November 2012 - 10:06 PM



Re caulk the teak deck? Shudder...


That is a job that I am about half way through.

Attached File  2012-11-08_17-22-54_103.jpg   129.49K   4 downloads
This is a crappy photo but it is the new propane torpedo heater I brought to keep the chill off and get the deck dry for caulking.

Attached File  2012-11-01_12-20-24_234.jpg   101.25K   6 downloads

Attached File  2012-11-08_17-23-07_181.jpg   161.67K   3 downloads

Finished sanding the port side Monday. Cabin top is the last part. What a job. Knee pads. Have to have them.

Additional I have to:
  • Rebuild aft head
  • Seal mast collar
  • Rebuild primary and secondary winches
  • New bilge pump
  • figure out a way to know when the water-maker is done back flushing. My brine water goes to a through hull. Maybe a T to the salt water faucet in the galley
  • Fix leaking deck mounted radar pole
Lots more of course.



Quit padding your list! We rebuilt everything on your winch farm except the port side cabin top winches next to the companionway right before Swiftsure...

If you were really planning on rebuilding them all again, consider this one of the best favors I have ever done for you....



Bullshit. The primaries and the secondaries weren't touched. Can't believe a crew of 8 couldn't do all 12 winches in two days. :P You guys have to do better if you want to race on my boat this year!

#74 Boomberries

Boomberries

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,042 posts
  • Location:Vancouver, Canada
  • Interests:Offshore and coastal sailing and racing. Classic wooden boats.

Posted 16 November 2012 - 02:06 AM



1. Have my port alternator sent out for replacement/repair.

2. Wait for next season.

Posted Image


3. Prepare for SAYC Narragansett Bay Rendezvous - Part Deux
4. Remove 5-gallon pales from keel
6. Gag and hog tie WHL and Booms
7. Book the Skiing Van Trapp Sisters for the Bearded Clam Clambake

Very funny. Looking forward to 3 - 7. I hope the van Trapps can make it.

Gag and hog tie? Involving a boat? Oooh baby ... sounds like my kinda fun! : P

Mung, are you sure those aren't the Man Trapp sisters?

#75 NonSequitur

NonSequitur

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 443 posts
  • Location:Alameda, CA

Posted 16 November 2012 - 01:59 PM




Re caulk the teak deck? Shudder...


That is a job that I am about half way through.

Attached File  2012-11-08_17-22-54_103.jpg   129.49K   4 downloads
This is a crappy photo but it is the new propane torpedo heater I brought to keep the chill off and get the deck dry for caulking.

Attached File  2012-11-01_12-20-24_234.jpg   101.25K   6 downloads

Attached File  2012-11-08_17-23-07_181.jpg   161.67K   3 downloads

Finished sanding the port side Monday. Cabin top is the last part. What a job. Knee pads. Have to have them.

Additional I have to:
  • Rebuild aft head
  • Seal mast collar
  • Rebuild primary and secondary winches
  • New bilge pump
  • figure out a way to know when the water-maker is done back flushing. My brine water goes to a through hull. Maybe a T to the salt water faucet in the galley
  • Fix leaking deck mounted radar pole
Lots more of course.



Quit padding your list! We rebuilt everything on your winch farm except the port side cabin top winches next to the companionway right before Swiftsure...

If you were really planning on rebuilding them all again, consider this one of the best favors I have ever done for you....



Bullshit. The primaries and the secondaries weren't touched. Can't believe a crew of 8 couldn't do all 12 winches in two days. :P You guys have to do better if you want to race on my boat this year!


Meh, your probably right, I only helped with the winches, it wasn't on my project list. I think it was run by that slacker who made the discovery of that new type of water impeller your PO was using. You know the ones without any remaining splines. :o ;)
By the way, don't forget to add to your list the cabin top winches on the port side next to the compainionway.....










I hope you keep the male and female winches seperate on that farm of yours....

#76 Pooch692000

Pooch692000

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 595 posts
  • Location:Eastern, Long Island

Posted 26 January 2013 - 04:10 PM

new to me J34c in october and have done or going to be doing before spring lainch:
1) sent mainsail to loft to get stiched up and cleaned
2) chemical stripped exterior teak grab rail and hand sanded with 150 grit (14 feet on each side aargh) waiting for weather to warm up and apply 3 layers of cetol natural teak and then 3 of the cetol marine gloss.
3) removed shot holding tank and reinstalling new one and jusry rigging anew bracket as new tank different dimensions than old.
4) Pulled mast to check rod riggin and while at it, stripped spreaders and going to repaint
5) rebedding chainplate caps
6) rewiring interior lights and replacing lamps with led's
7) replacing condenser unit for fridge
8) adjusting valves and replacing leaking gasket
9) flushing heat exchanger, oil changed, tranny flud replaced, engine work, etc..
10) cleaned and lubed 6 winches
11) sanding entire bottom with 60 grit, filling /faring some spots where keel meets hull, interprotect barrier coating lead part of keel and repainting entire bottom with mirco extra or west marine pca gold.
12)removed entire v-berth cabin sole. was shot from original leaking chainplates (chainplates were fixed, but not floor) Templated out the floor and cut and fitted 2 seperate 1/4" marine ply layers 2 coats of empxy on each side of both layers. First one will be epoxied and screwed in, 2nd layer epoxied to that and then applying/epoxying final layer of 2mm lonseal/vinyl teak/holly.
13) emptied entire boat and cleened every comartment with 50/50 bleach/water
14) grinded out delamination of rear, non-structural bulkhead-to-hull joint and will fillet and glass joint, then paint with bilgkote.
15) paying someone to compound and wax entire hull and topsides, have yard paint hull and launch.......
16) drink massive quantities of beers and hope wife enjoy the fruits of my labor. Will look like a brand new boat when done!!!!

#77 Beer Fueled Mayhem

Beer Fueled Mayhem

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 274 posts
  • Location:Ballard, WA

Posted 26 January 2013 - 05:39 PM

I was just going to replace/repair my raw water pump. As everyone knows, one job leads to the next. The mixing elbow on my Perkins Prima 50 is aluminum. While taking off the hose that injects water into the exhaust and then taking the fitting that held the hose I found this...
Attached File  47487C1E-7F59-4525-9A9A-CA9A660ED76E.JPG   443.69K   6 downloads

Attached File  AAEDB864-3465-47CC-ACB8-D4B061706DA2.JPG   461.19K   6 downloads

The elbow itself is fine. However no way can I bolt anything that area again. Luckily I have a new one.

Question. Do you guys think if I put Tefgel or Duralac on the bolts would that help? I am going to post this in Fix-it anarchy also.

#78 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 26 January 2013 - 11:09 PM

Beer:

Eww.
If the corrosion is from galvanic corrosion, putting something on the bolts may help. If it's just saltwater corrosion getting in around the bolt threads, I don't know if it'll do any good. Maybe Permatex to keep the water out in the first place might be a better help?

Hike Bitches is the master of sealing engine stuff, including threads.

#79 Beer Fueled Mayhem

Beer Fueled Mayhem

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 274 posts
  • Location:Ballard, WA

Posted 27 January 2013 - 04:16 PM

Beer:

Eww.
If the corrosion is from galvanic corrosion, putting something on the bolts may help. If it's just saltwater corrosion getting in around the bolt threads, I don't know if it'll do any good. Maybe Permatex to keep the water out in the first place might be a better help?

Hike Bitches is the master of sealing engine stuff, including threads.


Hey Ajax,
I'm sure it is a combination. I was thinking if the stainless didn't start to eat the aluminum then the salt water couldn't get to that area and speed up the process. The gasket and tenacity was the only thing keeping those two parts together. The wonders of preventative maintenance. I wonder what else lurks in the engine bay?
I'll have to look Permatex up.
Thanks for the response.

#80 Catalina 36

Catalina 36

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 377 posts
  • Location:Leesburg, VA

Posted 30 January 2013 - 09:47 AM

Replace water heater
Bottom Paint
Rebed Chainplates
Teak Touch-up

Already made my el-cheapo, high-tech cruiser tapered sheets for the Asym. It took a couple of trys, but I got the 1/4" end spliced into the 5/16" for our light air asym. When the sheets that the PO had proved way to heavy during the Gov Cup, I found I had enough of each line on board for one sheet, so we had "lopsided" sheets. It seemed both worked well enough but the 5/16's was easier on the hands. Rather than buy another lenght of 5/16, I cut both in half and end spliced them, so the trimer holds 5/16 but the from the block out to the sail will be 1/4.

If there is any budget left maybe towable genoa cars.
I also need a new dodger but there is no budget for that this year.

#81 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 30 January 2013 - 12:32 PM

Nice job on the end-to-end splicing, C-36. I want to learn that.

I just added a new item to my winter list: Atomic-4 "accessory drive".

For you diesel people, the Accessory Drive on an Atomic-4 drives the water pump and the alternator. The water pump is driven by an output shaft, on the aft end, and the alternator is driven by a belt and pulley on the forward end.

Since the engine sits at an angle, the front shaft bearing is often oil-starved and eventually fails. Moyer Marine has since fixed this, so the new drive should last longer than I will. It's not terribly expensive, but I'm mighty thin on cash right now, so it's sort of a big deal. Thank God it's only January. :angry:

#82 bljones

bljones

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,172 posts
  • Location:CA
  • Interests:Sailing

Posted 30 January 2013 - 01:48 PM

1. Starting a SUP build today, based on a Woodenboat article.
2. Have laid out the lines and am building the formers for a low-buck hard dodger for Whiskeyjack. Then , when the weather improves, I can get it hung and tweaked, and then start on reworking the soft bits and cutting and sewing a cockpit enclosure.
3. With warm up projects out of the way and work schedule modified for a four day workeweek, I pulll\ the trigger on the big cat build.

#83 blackjenner

blackjenner

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,627 posts
  • Location:Seattle
  • Interests:MrsBlack, Brigadoon, freedom

Posted 30 January 2013 - 06:43 PM

Find more attractive anchor....


I can lend you some chrome polish too.

Posted Image

Actually at work too...

Posted Image

#84 blackjenner

blackjenner

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 2,627 posts
  • Location:Seattle
  • Interests:MrsBlack, Brigadoon, freedom

Posted 30 January 2013 - 06:56 PM

We are halfway through the boat show and various seminars. We think our plan for this winter spring is:

1) find, document, exercise every seacock. have a plan for any problems we find.
2) steam clean the engine.
3) oil change on the engine and a thorough inventory of any issues.
4) expand batter bank from 230 AH to about 400-460 AH
5) New batter charger if necessary.
6) New alternator and separate voltage regulator.
7) finish lifeline replacement project (Amsteel inside what I believe is flexible polyethylene water pipe for chafe resistance and increased diameter for handling). 1.5 down and two to go.
8) fix weeping fuel fitting on tank side of Rancor
9) replace/fix diesel transfer pump for Dickenson
10) make curtains so we can dark the cabin better at night

and more...as I think of it.

Basically, I've been lazy. I've missed opportunities to do maintenance when I could have and gotten behind on stuff. I've been a bad liveaboard.

#85 GeorgB

GeorgB

    Member

  • Members
  • PipPipPipPipPip
  • 41 posts
  • Location:Helsinki, Finland

Posted 30 January 2013 - 09:33 PM

There's a lot to do and i'm itching to get started but it's freezing outside and i don't expect winter to relent for a few more months. We bought the boat last summer and there's much to do but this is my shortlist. I'm hoping for a warm spring!

- Keel fairing
- Some gelcoat touch-up
- Repacking the stuffingbox
- New standing rigging
- New lifelines
- A few bungs and some new caulking on the teak deck
- Re-bedding port saloon windows
- Run new heater hose to fo'c'sle
- Clean water tanks
- Some brightwork if i have the time

#86 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 30 January 2013 - 09:39 PM

Dude, you're in Helsinki. That's almost the same latitude as Iceland. Isn't it always winter there? ;)

#87 GeorgB

GeorgB

    Member

  • Members
  • PipPipPipPipPip
  • 41 posts
  • Location:Helsinki, Finland

Posted 30 January 2013 - 10:23 PM

Almost, but it doesn't stop us from sailing. I went sailing the 470 on the 25th of november last year, shit was cooler than cool. On the other hand, we probably get as many daylight hours per season as you though.... :)

#88 Cavelamb

Cavelamb

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 1,084 posts
  • Location:Texas

Posted 31 January 2013 - 03:28 AM

What ever the voices tell me to do....

#89 Ajax

Ajax

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,704 posts
  • Location:Edgewater, MD
  • Interests:It's Obvious!

Posted 06 February 2013 - 10:36 PM

Nice job on the end-to-end splicing, C-36. I want to learn that.

I just added a new item to my winter list: Atomic-4 "accessory drive".

For you diesel people, the Accessory Drive on an Atomic-4 drives the water pump and the alternator. The water pump is driven by an output shaft, on the aft end, and the alternator is driven by a belt and pulley on the forward end.

Since the engine sits at an angle, the front shaft bearing is often oil-starved and eventually fails. Moyer Marine has since fixed this, so the new drive should last longer than I will. It's not terribly expensive, but I'm mighty thin on cash right now, so it's sort of a big deal. Thank God it's only January. :angry:


Oh, I fucking LOVE free fixes!
As part of the accessory drive removal procedure, I had to remove the distributor first. Turns out that the dizzy is what was squealing. Some oil on the flyweights and grease on the cam for the points shut it right up. Just saved $150 bucks.

On to more fun projects...

#90 Hike, Bitches!

Hike, Bitches!

    Anarchist

  • Members
  • PipPipPipPipPipPipPip
  • 6,580 posts
  • Location:Solomons, MD

Posted 08 February 2013 - 03:17 AM

Ajax, I still visit CA, see? :rolleyes:

Winter project - install additional fresh water tank in the boat. Other projects that have manifested themselves from this project...

The galley & dead Princess stove are in the shed..the manifold, starter, carb & water jacket & valve plate from the engine are in the garage. As you already know, while disassembling, rotten manifold stud found...there is also a $160 box of associated parts from Moyer Marine that recently arrived in the garage. When warm enough, I am sanding, cleaning & painting. Should have it all back together this spring..I hope...or Mrs. Bitches will not be happy.

Glad to hear from other sources about your accessory drive not being an issue...sent you other details, re: Electronic Ignition, earlier today.





Also tagged with one or more of these keywords: electrical, fiberglass, epoxy, west systems, G flex, G10, mast, haul out, sea cock, plumbing

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users