Jump to content

Recommended Posts

The Pad-Tii range was launched in 2019 following feedback from the marine industry for the need for soft attachment deck fittings. 

Pad-Tii’s are a great choice if you are looking to add an attachment point to a surface. They offer minimal protrusion yet are easy to thread rope around and give a strong, solid fixing point for any fitting. 

The Allen design team came up with two solutions after continuing their development on the already tried and tested aluminium through deck bush range.  

  

Pad-Tii with Fixed Tii-Bar

The fixed Tii-Bar version is our simplest option. Installation is easy as there are only two pieces. 

Push the threaded through deck piece into the required fitting surface. The washer piece is then screwed on from the underside of the mounting surface, both pieces can then be tightened using a pair of circlip tools. For complete water tightness, it is recommended a small amount of sealant is used. 

Once the product is installed it leaves a smooth attachment point with minimal protrusion. The inside of the Pad-Tii features a domed shape to make feeding rope around the Tii-Bar extremely easy.

 

8939-BLACK-UNDONE.jpeg.9f8b98ff3ce502466c9aa0c33b57252c.jpeg

 

Pad-Tii with removable Tii-Bar

This design incorporates an ingenious removable attachment pin to give a wider range of fitting options. 

The removable Tii-Bar range comes in 3 pieces. A male and female through deck fitting and the removable Tii-bar. 

To install the fitting, you simply insert the female through deck part to the underside of the mounting surface. 

Make a loop with your rope and insert through the male part, then slide the Tii-Bar through the loop of the rope and pull the rope tight, this will hold the Tii-Bar in place. The male part is then screwed into the female part. 

A set of circlip tools can be used to tighten the through deck fittings. It is also recommended a small amount of sealant is used to ensure full water tightness. 

It is also possible to bond the female part into the mounting surface so that the male part and Tii-bar can be removed easily without the female part falling away. 

 

1930745533_A8739-8-Groupexplosion.jpeg.562818cd5173c1d17598c6773d829234.jpeg

Link to post
Share on other sites
4 hours ago, Tubes said:

Chicken-Pad-Thai_9-SQ.jpg

could I get an order of that with shrimp and chicken?

thanks

  • Like 1
Link to post
Share on other sites

A recent phonomon in Blighty is pubs turning their kitchens over to Thai restaurants. So you can enjoy such tasty treats with your warm flat beer. Outstanding. Good thinking the first man to come up with that concept. We salute you.

 

Edit, recent might be a bit of a stretch. But I'm getting old...

Link to post
Share on other sites
13 hours ago, Tubes said:

Chicken-Pad-Thai_9-SQ.jpg

We knew it wouldn't take long! 

 

The Pad Thai is where we got our inspiration from... its one of our MD's favourite dishes!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...