Have a look at Myriota
they are doing some great stuff in the ag and research space with multi-year year battery life and 3 or 4 pings per day
Ideal for long term yacht tracking...
Can anyone assist with the following B&G nmea question
Boat has B&G Hydra HPROD44 3003 cpu (see pics) and I'm trying to work out what manual I need to use to work out the nmea inputs.
When I connect my laptop (RS485 adaptor) to the processors nmea pins 21 through to 27 as per...
After sailing Adelaide to Sydney for the 2020 Race they arrived at the CYCA dock 5 mins before the race was cancelled.
John and another jumped on a plane and got out of there to SA that night, and the other guys took the boat up to QLD as that was the easiest option as that is where they...
Correction to the front page post.
They pulled out due to a tear in the main and a total power outage in the middle of the 1st night
So they went back to Sydney, and are now back on their way to Hobart with an ETA of 3rd Jan most likely
They got the boat from Brisbane to Sydney in 2.5 days...
+1 for isailor
I run it on a mini 1 and mini 5 as i find the form factor better. Now run it on 2 x devices as I upgraded to the mini 5 and the licence can be active on both devices.
Prefer to expedition for offshore racing with polars, targets etc, but isailor on the mini is good as a backup...
I'd suggest you're doing it the hard way
Much easier to find a local supplier of CALB or Winston LifeP04 3.2v cells in your area who is supplying the EV Conversion market.
Then buy some BMS modules such as the ones below and ideally a BCU-NEV to protect you from overcharge and low voltage...
Used an external power source to power up the processor only and still noisy on CH73
Disconnected the devices connected to the fastnet bus junction box and it stops - So time to start disconnecting the power for each display as suggested by Moonduster to determine the culprit...
Spent a few hours working on this one and it looks like it's the B&G Hydra processor that's creating the noise.
Disconnected the depth sensor and powered up the processor as a standalone device using a live feed from another power source (nothing else was on) and it instantly makes the...
Thanks for the tips above.
I'll try all of those options on the weekend and see what we find.
The VHF handheld if a great suggestion or starters
Was going to try the emergency antenna on wednesday but ran out of time and didn't want to to have the panel in bits before we did a windy 27+kn...
Long time since I've posted and looking for a bit of knowledge base help re Ch 73 noise. (Did a forum search no luck)
About to do an offshore and regatta later this month and Ch73 is in the Si's - need to fix a Ch73 noise problem.
New boat I'm on has lots of noise on CH 73 since a new...
I was there yesterday on the water and here's a bit of on the water info.
People I know who were there Friday night -
Said Tech2 caught the finish line buoy mooring line with their rudder - which is what flipped them and ripped the back of the boat off on Friday night in the first race.