Girl with patreon account goes sailing in hot place

Fah Kiew Tu

Curmudgeon, First Rank
11,481
4,276
Tasmania, Australia
I've also recently deleted or severely reduced my time on social media, and I definitely feel better for it.

Best thing you can do IMO. I got asked to join a Fauxbook group the other day. I had to say that I wasn't on Fauxbook, never had been and never would be.

There's only 3 or 4 internet forums I bother reading and I really only contribute to 2 of them. Probably too many...

FKT
 

Jud - s/v Sputnik

Super Anarchist
7,346
2,377
Canada
jud, most of the Flemish instructions I know use a very very short bury (like 2" or so), intentionally because the aim is to put a nice finish on the end using the least amount of line. Those short bury's need some extra security to hold the loop (in case the line gets snagged or something), which will generally be a whipping or some sewing. If you don't like whippings, you can just put a few lock stitches in (just by hand is fine or if you have a sewing machine put on two zigzag 'bar tacks' generally looks nice and usually stronger). You could make the flemish eye secure by itself, without whipping or sewing, by making a longer tighter more secure bury, but that would make it hard to do and use more line and sort of defeat the intent.
Thanks for this, Evans. It twigged my memory - I went into my shed and found a short offcut of rope (that I wasn’t sure I still had) that had a Flemish eye that I remembered. I recall that it definitely didn’t have a whipping on it (as in the vid I posted above)…however, having a look at it, I see that it does have a very small lock stitch (the two red stitches barely visible on the rope) holding the splice in place - which is enough, of course, since it doesn’t have to have any real strength. And, indeed, as you say, it doesn’t have to have a long bury, as the one in the vid does. Looking at it closely, I see that the offcut of line with Flemish eye that I have (from a pro rigger’s shop) has only a quite short bury.

(My thinking is that I’ll probably have to lay up the boat somewhere in the world during an extended cruise, so it’ll be nice to have the eyes on mast lines (halyards and topping lift) as an easy way to pull in messenger lines after removing sails/pulling out lines to lay up the boat.)

A9E91437-DF03-4B3C-B02D-B1BCE405DE7E.jpeg
 
Last edited:

estarzinger

Super Anarchist
7,943
1,363
it’ll be nice to have the eyes on mast lines (halyards and topping lift) as an easy way to pull in messenger lines after removing sails/pulling out lines to lay up the boat.)
They are a nice and useful way to finish the ends. I will say that there is a quicker and dirty method to get a loop in the ends for messengering - just take some 100lb dyneema fishing line (useful stuff to have around on the boat for small lashings) and sew it thru the end leaving a loop standing out and then tie the ends so they will not pull thru. I have done that on friends' boats where I was helping pull halyards and they did not have finished eyes. Works fine.

Sorry for being ot, I will have to figure how to get hot girls integrated into my rope comments :)
 

Jud - s/v Sputnik

Super Anarchist
7,346
2,377
Canada
They are a nice and useful way to finish the ends. I will say that there is a quicker and dirty method to get a loop in the ends for messengering - just take some 100lb dyneema fishing line (useful stuff to have around on the boat for small lashings) and sew it thru the end leaving a loop standing out and then tie the ends so they will not pull thru. I have done that on friends' boats where I was helping pull halyards and they did not have finished eyes. Works fine.

Sorry for being ot, I will have to figure how to get hot girls integrated into my rope comments :)
I gotta say, I like the splicing solution because it’s more elegant - it basically uses only the rope (and, indeed, you could pull out a yarn from the rope and use that to lock stitch the splice, not requiring any “outside” materials)— but mainly I like it because I have so little experience splicing, and this one is super easy.

I dunno…off topic is good…ropes, hot girls…getting into uncharted territory here :)
 

ProaSailor

dreaming my life away...
6,307
887
Oregon

Kris Cringle

Super Anarchist
3,919
3,836
Please do your part on YouTubes heinous assault on the beauty of Sailing: Screenshot the channel so the YT algorithm doesn't think we're all perverts. :)

From first AI picks of cooking on a Sailboat search:

Screen Shot 2023-06-02 at 6.42.48 AM.png
 

Jud - s/v Sputnik

Super Anarchist
7,346
2,377
Canada
There may or may not be sailing involved. But, with an Angus Row Cruiser, there could be - they sail and row. Always thought this would be my next boat (one of them anyway) - awesome boat for several weeks or months of small-scale coastal adventuring.

Winter trip up the BC Coast to prep for a NW Passage attempt:

 



Latest posts

SA Podcast

Sailing Anarchy Podcast with Scot Tempesta

Sponsored By:

Top