Show your boat not sailing

Beer fueled Mayhem

Anarchist
657
196
Ballard, WA
PYI usually wants the old Max prop as a "trade-in" and they knock some of the price off. Jerome let me keep mine. It works well still. A bit ugly and used for sure. I might Craigslist it after a bit of polishing...
 

Bugsy

Super Anarchist
2,579
888
Canada
Mostly in Bass Strait and the Tasman Sea,
You, sir, have my utmost respect.

I spent a week in that area in a small (2,500 ton) and narrow (L/B ~ 8) Navy ship. Seas were constantly 15 m. For the entire week no one was allowed on deck and the cooks could only make scrambled eggs and sandwiches.

I wish you fair winds.
 

KramN

New member
38
86
Seasonal Photo.

xmasLights.jpg
 

accnick

Super Anarchist
3,770
2,764
Beer Mayhem - please please please post your judgements on the 4 blade vs 3 blade as soon as you have some motoring time in. I'm very curious to see if there is much difference at this size range. I've installed quite a few 3 blades, really like them
I'm curious about the 4-blade as well, and would be interested in the logic behind it for a sailboat.
 

Cheyne

New member
On the hard for a repower. Just what we wanted to do before leaving for the winter. Lucky for us Yanmar came through with engines and saildrives. Out with the Volvo's.

20221207_140331.jpg
 

Beer fueled Mayhem

Anarchist
657
196
Ballard, WA
I'm curious about the 4-blade as well, and would be interested in the logic behind it for a sailboat.
Splashed my boat yesterday.
Sadly, PYI was off on the pitch. I am waaaaay under pitch. The motor just rockets to redline almost like being in idle. At my cruising RPM (2400~), I was only able to get 6.8 knots. I was at 7.8 with the three blade. So I'll dive on the prop and bump it up. I am currently at 22°. Per Jerome, every 2° drops the RPM by 250. He is thinking maybe bumping it to 26°.
There is thought about overpitching so you load the motor more and make it work...
I will say the prop is super smooth. I'll report back after I adjust the pitch.
 

longy

Overlord of Anarchy
7,174
1,381
San Diego
Be very careful about over pitching. You must know just where engine overloads & not pass that RPM. Yanmar strongly against this concept.
 


Latest posts





Top